Ultimate limit capacity of thin-walled cold-formed steel members
Keywords:
thin-walled cold-formed steel members, plastic mechanisms, compression and/or bending, experimental tests, numerical simulationsAbstract
This paper is a review of research done in the recent years as a result of collaboration between the Department of Steel Structures and Structural Mechanics of the Politehnica University of Timisoara, Laboratory of Steel Structures of the Romanian Academy and Department of Strength of Materials of the Lódz University of Technology related to load carrying capacity, post-failure behaviour and plastic mechanisms of failure of thin-walled cold-forms steel (TWCFS) members subjected to compression and/or bending.
References
EN 1993-1-1:2005, Eurocode 3: Design of steel structures – Part 1-1: General rules and rules for buildings, European Committee for Standardization, Brussels, Belgium (including EN 1993-1-1: 2005/AC, 2009).
MURRAY, N.W., KHOO, P.S., Some basic plastic mechanisms in thin-walled steel structures, Int. J. Mech. Sci., 23, 12, pp. 703-713, 1981.
UNGUREANU, V., KOTELKO, M., MANIA, R.J., DUBINA, D, Plastic mechanisms database for thin-walled cold-formed steel members in compression and bending, Thin-Walled Structures, 48, 10-11, pp. 818-826, 2010.
MAHENDRAN, M., Local plastic mechanisms in thin steel plates under in-plane compression, Thin-Walled Structure, 27, 3, pp. 245-261, 1997.
KOTELKO, M., Load-carrying capacity and mechanisms of failure of thin-walled structures, WNT Warszawa (in Polish), 2010.
KATO, B., Buckling strength of plates in the plastic range, International Association of Bridge and Structural Engineering, 25, pp. 127-141, 1965.
KOROL, R.M., SHERBOURNE, A.N., Strength prediction of plates in uniaxial compression, Journal of Structural Division, 98, pp. 1965-1986, 1972.
SIN, K.W., The collapse behaviour of thin-walled sections, PhD Thesis, Dept. of Mechanical Engineering, University of Strathclyde, Glasgow, 1985.
RONDAL, J., MAQUOI, R., Stub-column strength of thin-walled square and rectangular hollow sections, Thin-Walled Structures, 3, 1, pp. 15-34, 1985.
KRAGERUP, J., Five notes on plate buckling, Technical University of Denmark, Department of Structural Engineering, Series R, No. 143, 1982.
UNGUREANU, V., DUBINA, D., Recent research advances on ECBL approach. Part I: Plastic– elastic interactive buckling of cold-formed steel sections, Thin Walled Structures, 42, pp. 177-194, 2004.
RASSMUSSEN, K.J.R., HANCOCK, G.J., Nonlinear analyses of thin-walled channel-section columns, Thin-Walled Structures, 13, 1-2, pp. 145-176, 1991.
HORNE, M.R., Plastic Theory of Structures, Thomas Nelson & Sons, 1971.
Published
Issue
Section
Copyright (c) 2020 The Romanian Journal of Technical Sciences. Applied Mechanics.
This work is licensed under a Creative Commons Attribution 4.0 International License.